#include <HX711.h>


HX711 scale;

void setup() {
  Serial.begin(115200);
  //Serial.println("HX711 Demo");

  //Serial.println("Initializing the scale");
  // parameter "gain" is ommited; the default value 128 is used by the library
  // HX711.DOUT	- pin #A1
  // HX711.PD_SCK	- pin #A0
  scale.begin(2, 3);

  //Serial.println("Before setting up the scale:");
  //Serial.print("read: \t\t");
  //Serial.println(scale.read());			// print a raw reading from the ADC

  //Serial.print("read average: \t\t");
  //Serial.println(scale.read_average(20));  	// print the average of 20 readings from the ADC

  //Serial.print("get value: \t\t");
  //Serial.println(scale.get_value(5));		// print the average of 5 readings from the ADC minus the tare weight (not set yet)

  //Serial.print("get units: \t\t");
  //Serial.println(scale.get_units(5), 1);	// print the average of 5 readings from the ADC minus tare weight (not set) divided
						// by the SCALE parameter (not set yet)

  scale.set_scale(2280.f);                      // this value is obtained by calibrating the scale with known weights; see the README for details
  scale.tare();				        // reset the scale to 0

  //Serial.println("After setting up the scale:");

  //Serial.print("read: \t\t");
  //Serial.println(scale.read());                 // print a raw reading from the ADC

  //Serial.print("read average: \t\t");
  //Serial.println(scale.read_average(20));       // print the average of 20 readings from the ADC

  //Serial.print("get value: \t\t");
  //Serial.println(scale.get_value(5));		// print the average of 5 readings from the ADC minus the tare weight, set with tare()

  //Serial.print("get units: \t\t");
  //Serial.println(scale.get_units(5), 1);        // print the average of 5 readings from the ADC minus tare weight, divided
						// by the SCALE parameter set with set_scale

  //Serial.println("Readings:");
}

void loop() {
  //Serial.print("one reading:\t");
  //Serial.print(scale.get_units(), 1);
  //Serial.print("\t| average:\t");
  if (Serial.available() > 0)  {
    Serial.read();
    Serial.println(scale.get_units(), 1);

    //scale.power_down();			        // put the ADC in sleep mode
    //delay(100);
    //scale.power_up();
  }
}