You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
64 lines
2.2 KiB
64 lines
2.2 KiB
#include <HX711.h>
|
|
|
|
|
|
HX711 scale;
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
//Serial.println("HX711 Demo");
|
|
|
|
//Serial.println("Initializing the scale");
|
|
// parameter "gain" is ommited; the default value 128 is used by the library
|
|
// HX711.DOUT - pin #A1
|
|
// HX711.PD_SCK - pin #A0
|
|
scale.begin(2, 3);
|
|
|
|
//Serial.println("Before setting up the scale:");
|
|
//Serial.print("read: \t\t");
|
|
//Serial.println(scale.read()); // print a raw reading from the ADC
|
|
|
|
//Serial.print("read average: \t\t");
|
|
//Serial.println(scale.read_average(20)); // print the average of 20 readings from the ADC
|
|
|
|
//Serial.print("get value: \t\t");
|
|
//Serial.println(scale.get_value(5)); // print the average of 5 readings from the ADC minus the tare weight (not set yet)
|
|
|
|
//Serial.print("get units: \t\t");
|
|
//Serial.println(scale.get_units(5), 1); // print the average of 5 readings from the ADC minus tare weight (not set) divided
|
|
// by the SCALE parameter (not set yet)
|
|
|
|
scale.set_scale(2280.f); // this value is obtained by calibrating the scale with known weights; see the README for details
|
|
scale.tare(); // reset the scale to 0
|
|
|
|
//Serial.println("After setting up the scale:");
|
|
|
|
//Serial.print("read: \t\t");
|
|
//Serial.println(scale.read()); // print a raw reading from the ADC
|
|
|
|
//Serial.print("read average: \t\t");
|
|
//Serial.println(scale.read_average(20)); // print the average of 20 readings from the ADC
|
|
|
|
//Serial.print("get value: \t\t");
|
|
//Serial.println(scale.get_value(5)); // print the average of 5 readings from the ADC minus the tare weight, set with tare()
|
|
|
|
//Serial.print("get units: \t\t");
|
|
//Serial.println(scale.get_units(5), 1); // print the average of 5 readings from the ADC minus tare weight, divided
|
|
// by the SCALE parameter set with set_scale
|
|
|
|
//Serial.println("Readings:");
|
|
}
|
|
|
|
void loop() {
|
|
//Serial.print("one reading:\t");
|
|
//Serial.print(scale.get_units(), 1);
|
|
//Serial.print("\t| average:\t");
|
|
if (Serial.available() > 0) {
|
|
Serial.read();
|
|
Serial.println(scale.get_units(), 1);
|
|
|
|
//scale.power_down(); // put the ADC in sleep mode
|
|
//delay(100);
|
|
//scale.power_up();
|
|
}
|
|
}
|