Added button feature

cardlistener.py

@@ -1,7 +1,20 @@
-import time
+import time, json
-import json
+import RPi.GPIO as GPIO
 
 if __name__ == '__main__':
+	pin_config = {}
+	with open('pin_config.json') as pin_config_stream:
+		pin_config = json.load(pin_config_stream)
+	if pin_config['mode'] == 'BOARD':
+		GPIO.setmode(GPIO.BOARD)
+	else:
+		GPIO.setmode(GPIO.BCM)
+	GPIO.setup(pin_config['frigde_btn'], GPIO.IN, pull_up_down=GPIO.PUD_UP)
+	GPIO.setup(pin_config['tools_btn'], GPIO.IN, pull_up_down=GPIO.PUD_UP)
+	GPIO.setup(pin_config['fridge_red_LED'], GPIO.OUT)
+	GPIO.setup(pin_config['fridge_grn_LED'], GPIO.OUT)
+	GPIO.setup(pin_config['tools_red_LED'], GPIO.OUT)
+	GPIO.setup(pin_config['tools_grn_LED'], GPIO.OUT)
 	while True:
 		cardID = raw_input("Enter card ID: ")
 		event = {}
@@ -12,6 +25,36 @@ if __name__ == '__main__':
 			with open('cards/' + cardID + '.json') as card_data:
 				data = json.load(card_data)
 				event["name"] = data['name']
+				if data['secretTools']:
+					GPIO.output(pin_config['tools_grn_LED'], GPIO.HIGH)
+				else
+					GPIO.output(pin_config['tools_red_LED'], GPIO.HIGH)
+				if data['fridge']:
+					GPIO.output(pin_config['fridge_grn_LED'], GPIO.HIGH)
+				else
+					GPIO.output(pin_config['fridge_red_LED'], GPIO.HIGH)
+				timeout = time.time() + 5 # 5 seconds timeout
+				while wait:
+					if data['secretTools'] and GPIO.input(pin_config['tools_btn']) == 0:
+						wait = False
+						GPIO.output(pin_config['fridge_grn_LED'], GPIO.LOW)
+						GPIO.output(pin_config['tools_grn_LED'], GPIO.LOW)
+						GPIO.output(pin_config['fridge_red_LED'], GPIO.LOW)
+						GPIO.output(pin_config['tools_red_LED'], GPIO.LOW)
+						# Open tools
+					if data['fridge'] and GPIO.input(pin_config['fridge_btn']) == 0:
+						GPIO.output(pin_config['fridge_grn_LED'], GPIO.LOW)
+						GPIO.output(pin_config['tools_grn_LED'], GPIO.LOW)
+						GPIO.output(pin_config['fridge_red_LED'], GPIO.LOW)
+						GPIO.output(pin_config['tools_red_LED'], GPIO.LOW)
+						wait = False
+						# Open fridge
+					if time.time() > timeout:
+						GPIO.output(pin_config['fridge_grn_LED'], GPIO.LOW)
+						GPIO.output(pin_config['tools_grn_LED'], GPIO.LOW)
+						GPIO.output(pin_config['fridge_red_LED'], GPIO.LOW)
+						GPIO.output(pin_config['tools_red_LED'], GPIO.LOW)
+						wait = False
 		except:
 			print "Card not registered."
 		history = []

pin_config.json

@@ -0,0 +1,9 @@
+{
+    "mode" : "BOARD",
+    "fridge_btn" : 16,
+    "tools_btn" : 18,
+    "fridge_red_LED" : 31,
+    "fridge_grn_LED" : 33,
+    "tools_red_LED" : 35,
+    "tools_grn_LED" : 37,
+}